Piston-Valve (Angle-Seat) KLJZF-Series SS-Double-Acting

สารบัญบทความ
Features of Angle Seat Valve
- With valve open or closed position display
- Pneumatic external pilot, can increase the service life, maintenance-free
- There is a self-adjusting seal gland between the overflow port and the slider to improve the sealing performance
- Y-type structure design enabling large flow (compared with globe valve), compact structure, fast response
Technical Specification
- Medium Temperture : -10℃~+180℃
- Ambient Temperture : -10℃~+60℃
- Max. Working Pressure : 1.6MPa
- Working Medium : Netral and aggressive liquid, gases
- Working Pressure : 0.4~0.8MPa
- Orifice Size : DN15-DN100
- Body Material : SS304 , SS316
- Actuator Material : Stainless steel
- Sealing Material : PTFE
- Normally Closed : Double Acting
Dimension
Flow direction
Flow direction below the seat (direction A) 1.Valves with flow direction below the seat (direction A) ensure long service life 2.Valves used for liquid media are waterhammer-free 3.Valves with orifice DN15/DN20/DN25 are ideal for the operating pressure of 0.3Mpa Vavles with orifice DN32/DN40 are operated with double-acting actuators DN100 Valves with orifice DN50 are operated with double-acting actuators DN125 Flow direction above the seat (direction B) Valves with dirction B provide high sealing integrity, used for steam and gases media. There is a danger of waterhammer ,when the valves used for liquid media.Installation & Maintenance
1. Clean the pipes carefully from any residue, dribble or welding residue, to avoid any damage to the seal. 2. To be installed as required, preferably with actuator in upright position 3. Connect the pipes according to the reference points (flow direction) found on the valve body.Only disassemble the actuator if required by customer 4. Before taking the valve apart, depressurize the media supply and pilot air supply piping systemGallery for Pneumatic Angle Seat Valve
สินค้าแนะนำ
แนะนำสินค้าหมวด Positioner
PAKO
สินค้าจาก PAKO Engineering
TYPE YT-3400 / YT-3450
Rotork Smart Positioner แบบ Flameproof
- Auto calibration และ PID control
- สื่อสารผ่าน HART
- หน้าจอ LCD พร้อมปุ่มตั้งค่า 4 ปุ่ม
TYPE YT-3300 / YT-3350
Rotork Smart Positioner
- Auto calibration ผ่านเมนูใช้งานง่าย
- Partial Stroke Test (PST)
- Feedback signal 4–20 mA
TYPE YT-1000 / YT-1050
Rotork Electro-Pneumatic Positioner
- ปรับ Zero / Span ง่าย
- ตั้ง Reverse / Direct Acting ได้
- ทนแรงสั่นสะเทือนสูง
TYPE SIPART PS2
Siemens Positioner SIPART PS2
- มีเซนเซอร์แรงดันในตัว ช่วยวินิจฉัยปัญหา
- Partial Stroke Test, Fail-in-Place
- ติดตั้งและ Calibrate ง่าย
TYPE EPL / EPR
Power-Genex Electro-Pneumatic Positioner
- มีทั้งแบบ Linear (EPL) และ Rotary (EPR)
- บอดี้อะลูมิเนียมเคลือบกันกัดกร่อน
- ออกแบบให้ทนแรงสั่นสะเทือน


